316 Stainless Steel Strip, Coil, & Sheet
316: UNS: S31600, EN-DIN: 1.4401
products & materials
UNS S31600 Stainless Steel Strip, Coil, & Sheet
- AMS 5507
- ASTM A240
- ASTM A666
Our wide capabilities give us a unique ability to supply all of your 316 stainless steel strip, coil, and sheet needs.
description
316 Stainless Steel Description:
316 stainless strip coil is an austenitic chromium nickel stainless steel containing molybdenum. This addition increases general corrosion resistance, improves resistance to pitting from chloride ion solutions, and provides increased strength at elevated temperatures. Properties are similar to those of Type 304 except that this alloy is somewhat stronger at elevated temperatures. Corrosion resistance is improved, particularly against sulfuric, hydrochloric, acetic, formic, and tartaric acids; acid sulfates and alkaline chlorides. 316 stainless steel strip, coil, and sheet can be used for a variety of applications.
Industries Supplied:
- Aerospace
- Chemical Processing
- Food Processing
- Power Generation
- General Manufacturing
applications
316 Stainless Steel Uses & Applications:
Common Applications include:
- Exhaust manifolds
- Furnace parts
- Heat exchangers
- Jet engine parts
- Pharmaceutical and photographic equipment
- Valve and pump trim
- Chemical equipment
- Digesters
- Tanks
- Evaporators
- Pulp
- Paper
- Textile processing equipment
- Parts exposed to marine atmospheres and tubing
Nominal Composition
| C | Mn | P | S | Si | Cr | Ni | Mo | N | Fe | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIN | – | – | – | – | – | 16.0 | 10.0 | 2.00 | – | – |
| MAX | 0.008 | 2.0 | 0.045 | 0.030 | 0.75 | 18.0 | 14.0 | 3.00 | 0.10 | BAL |
Physical Properties
| At 70°F | At 20°C | |
|---|---|---|
| Density | 0.29 lb./in³ | 7.99 g/cm³ |
| Modulus of Elasticity (E) | 28.0 x 10³ ksi | 193 x 10³MPa |
| Coefficient of Expansion | 8.9 x 10⁻⁶ microinches/in.-°F (32-212°F) | 16.0 μm/m-°C (0-100°C) |
| Electrical Resistivity | 29.4 μ ohm.in | 74 μ ohm.cm |
| Thermal Conductivity | 9.4 Btu-in./ft.²hr.-°F (100°C) | 16.2 W/m-K (100°C) |
Typical Room Temperature Mechanical Properties
Typical Mechanical Properties
Typical mechanical properties are based on AK source, ASTM A240.
| Condition | Tensile Strength Min (UTS) | 0.2% YS Min | Elongation% in 2” Min (50.8 mm) | Hardness Rockwell |
|---|---|---|---|---|
| Annealed (Min) | 81 ksi (558 MPa) | 42 ksi (290 MPa) | 50% | 79 HRBW (Max) |
* Tempered Properties available upon request
Limitation of Liability and Disclaimer of Warranty:
- The content in these data sheets is provided primarily by third-party melting mills and is provided for reference only. It is not intended for engineering or design.
- Applications may be discussed, however, Combined Metals Company, LLC, does not recommend or endorse any material for any particular end use or application.
- The data included in this data sheet are typical values and may vary.
- Combined Metals Company, LLC, makes no representations or warranties, express or implied, as to the accuracy, completeness, condition, suitability, performance, fitness for a particular purpose, or merchantability of any information contained in any data sheet.
In no event will Combined Metals Company, LLC, be liable for any damages whatsoever arising from the use of the information included in the data sheets.
316 Stainless Steel FAQ
What makes 316/316L steel strip & slit coil beneficial?
More Corrosion Resistant than 304 SS, L Grade recommended for welded applications, Durable, Formable, & Corrosion Resistant
What applications work best for 316/316L SS Strip & Slit Coils?
Hypodermic Needles
Flexibles Hoses
Clamps
Evaporators
Bellows
Airbag Sensors
Tubing
Cooling Coils
Hinges
Oil & Gas Filter Screens
Marine Applications
What are the available finishes for your 316/316L stainless steel products? How might these finishes help benefit the Strip or Slit Coil?
Wet or Dry polish
#3,
#4,
#4 fine,
#6,
#7,
#8 Mirror
custom finishes are available from 0.012” (30 Ga.) to 0.120” (12 Ga.)
Mill-Buffed Polished Stainless Steel – highly reflective
Commercial 1BA
Smooth/Brite 2BA
1BA Polish Quality
Ultra Smooth 2BA
2B
2D Dull Surface
Dull High Friction
Lite Matte
What are the standard tolerances for your products?
Typically ½ of industry standard tolerances
Can you provide custom sizes and shapes?
Yes, we provide precision rolled strip products, custom slit to width slit coils, custom size sheet, blanks and round circles.
What is the minimum order quantity (MOQ)?
From prototype to production size orders.
What quality standards do you adhere to?
Do you offer mill test reports for 316/316L (MTRs)?
Test reports provided with all shipments. If mill test reports are needed, you need to advise at time of quotation.
Combined Metals: Who We Are
Combined Metals Company (formerly Combined Metals of Chicago ) processes and distributes over 75 alloys of precision strip and wire. Our precision rolling mills, drawing mills, and extensive network of independent North American service centers, support thousands of customers in many industries including Aerospace, Automotive, Chemical, Consumer, Defense, Electronics, Medical, Oil/Gas, and Power Generation, worldwide.
HELPFUL TOOLS
Coil Calculator
Choose a calculator to find coil weights, coil OD’s, coil footage, and PIW.
PIW & Footage
Weight & Footage
Weight & PIW
