441 Stainless Steel Strip, Coil & Sheet
UNS: S44100
EN DIN: 1.4509
UNS S44100 Stainless Steel Strip, Coil & Sheet
- ASTM A240
Our wide capabilities give us a unique ability to supply all of your 441 stainless steel strip, coil, and sheet needs.
description
441 Stainless Steel Alloy Description:
Type 441 is a nominal 18% chromium-bearing ferritic stainless steel stabilized with columbium. The alloy provides good high-temperature strength that exceeds that of type 409 and 439 stainless steels. Type 441 offers good corrosion resistance in many exhaust gas environments, equivalent to that of 439 and 18 Cr-Cb stainless steels.
application
441 Stainless Steel Alloy Uses & Applications:
Applications include:
- Exhaust systems
- Automotive manifolds
- Tubes
Industries supplied include:
- Automotive/Transportation
- General Manufacturing
Nominal Composition
| C | Mn | P | S | Si | Cr | Ni | N | Cb | Ti | Fe | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MIN | – | – | – | – | – | 17.5 | – | – | 0.30+9*C | 0.10 | BAL |
| MAX | 0.03 | 1.0 | 0.04 | 0.030 | 1.00 | 19.5 | 1.00 | 0.03 | 0.90 | 0.50 | – |
Physical Properties
| At 70°F | At 20°C | |
|---|---|---|
| Density | 0.278 lb./in³ | 7.7 g/cm³ |
| Modulus of Elasticity (E) | 29 x 10³ ksi | 200 GPa |
| Coefficient of Expansion | 5.7 µin/in-°F (32-212°F) | 10.2 μm/m-°C (0-100°C) |
| Electrical Resistivity | 23.1 μ ohm.in | 58.7 μ ohm.cm |
| Thermal Conductivity | 173 Btu-in./ft.²hr.-°F | 25 W/m-K |
Typical Room Temperature Mechanical Properties
Typical Mechanical Properties
Typical mechanical properties are based on ASTM A240.
| Condition | Tensile Strength Min (UTS) | 0.2% YS Min | Elongation% in 2” Min (50.8 mm) | Hardness Rockwell |
|---|---|---|---|---|
| Annealed | 70 ksi (MPa) | 45 ksi (MPa) | 30% | 80 HRBW |
Limitation of Liability and Disclaimer of Warranty:
- The content in these data sheets is provided primarily by third-party melting mills and is provided for reference only. It is not intended for engineering or design.
- Applications may be discussed, however, Combined Metals Company, LLC, does not recommend or endorse any material for any particular end use or application.
- The data included in this data sheet are typical values and may vary.
- Combined Metals Company, LLC, makes no representations or warranties, express or implied, as to the accuracy, completeness, condition, suitability, performance, fitness for a particular purpose, or merchantability of any information contained in any data sheet.
In no event will Combined Metals Company, LLC, be liable for any damages whatsoever arising from the use of the information included in the data sheets.
Combined Metals: Who We Are
Combined Metals Company (formerly Combined Metals of Chicago ) processes and distributes over 75 alloys of precision strip and wire. Our precision rolling mills, drawing mills, and extensive network of independent North American service centers, support thousands of customers in many industries including Aerospace, Automotive, Chemical, Consumer, Defense, Electronics, Medical, Oil/Gas, and Power Generation, worldwide.
HELPFUL TOOLS
Coil Calculator
Choose a calculator to find coil weights, coil OD’s, coil footage, and PIW.
PIW & Footage
Weight & Footage
Weight & PIW
