UNS: S32205
W.Nr 1.4462
2205 Stainless Steel Alloy
2205 Stainless Steel Alloy
Strip and Foil:
- ASTM A240
- NACE MR0175/ISO 15156
Our wide capabilities give us a unique ability to supply all of your 2205 Stainless Steel Alloy needs.
description
2205 Stainless Steel Alloy Description:
Type 2205 is a duplex (austenitic/ferritic) stainless steel alloyed with chromium, molybdenum, and nitrogen for improved performance and corrosion resistance compared to 304 and 316 stainless steels. The alloy’s distributed austenite/ferrite microstructure combined with the alloying additions provide resistance to stress corrosion cracking, pitting, and chlorine induced crevice corrosion. Alloy 2205 also has acceptable oxidation resistance up to 980°C, but only for specific applications as the material can become embrittled when exposed to temperatures between 300°C and 1000°C for extended periods. Type 2205 stainless steel strip, coil, and sheet can be used for a variety of applications.
applications
2205 Stainless Steel Alloy Uses & Applications:
Applications include:
- Mixing tanks
- Heat exchangers
- Pressure vessels
- Extraction/distillation columns
- Pulp processing equipment
- Pipes
- Pumps
- Food processing equipment
- Springs
Industries Supplied:
- Chemical Processing
- Oil & Gas
- Nuclear Power Generation
- Food Processing
Nominal Composition
| C | Mn | P | S | Si | Cr | Ni | Mo | N | Fe | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIN | – | – | – | – | – | 22.0 | 4.5 | 3 | 0.14 | BAL |
| MAX | 0.03 | 2.0 | 0.03 | 0.02 | 1.0 | 23.0 | 6.5 | 3.5 | 0.20 | – |
Physical Properties
| At 70°F | At 20°C | |
|---|---|---|
| Density | 0.284 lb./in³ | 7.86 g/cm³ |
| Modulus of Elasticity (E) | 29.0 x 10³ ksi | 200 GPa |
| Coefficient of Expansion | 11.1 x 10⁻⁶ microinches/in.-°F (70-2000°F) | 14.0 μm/m-°C (0-300°C) |
| Electrical Resistivity | 33.5 μ ohm.in | 85.1 μ ohm.cm |
| Thermal Conductivity | 104 Btu-in./ft.²hr.-°F | 15.0 W/m-K |
Typical Mechanical Properties
| Condition | Tensile Strength Min (UTS) | 0.2% YS Min | Elongation% in 2” Min (50.8 mm) | Hardness Rockwell |
|---|---|---|---|---|
| Annealed | 120-150 ksi (825-1035 MPa) | 95-125 ksi (655-860 MPa) | 25% | 30 HRC |
Limitation of Liability and Disclaimer of Warranty:
- The content in these data sheets is provided primarily by third-party melting mills and is provided for reference only. It is not intended for engineering or design.
- Applications may be discussed, however, Combined Metals Company, LLC, does not recommend or endorse any material for any particular end use or application.
- The data included in this data sheet are typical values and may vary.
- Combined Metals Company, LLC, makes no representations or warranties, express or implied, as to the accuracy, completeness, condition, suitability, performance, fitness for a particular purpose, or merchantability of any information contained in any data sheet.
In no event will Combined Metals Company, LLC, be liable for any damages whatsoever arising from the use of the information included in the data sheets.
Combined Metals: Who We Are
Combined Metals Company (formerly Combined Metals of Chicago ) processes and distributes over 75 alloys of precision strip and wire. Our precision rolling mills, drawing mills, and extensive network of independent North American service centers, support thousands of customers in many industries including Aerospace, Automotive, Chemical, Consumer, Defense, Electronics, Medical, Oil/Gas, and Power Generation, worldwide.
HELPFUL TOOLS
Coil Calculator
Choose a calculator to find coil weights, coil OD’s, coil footage, and PIW.
PIW & Footage
Weight & Footage
Weight & PIW
The Combined Metals Family of Companies
Explore Our Companies
get in touch
Questions? Contact Our Experts Today.
The Combined Metals Company mission is to safely produce and distribute the best value and the highest quality engineered stainless steel coil and sheet, specialty alloy strip, foil, and wire products and to deliver those products to customers around the world. Give us a call at (800) 323-0758 or fill out the form.
*denotes a required field.