UNS: S40910/S40920/S40930
EN-DIN: 1.4512
409 Stainless Steel Alloy
products & materials
409 Stainless Steel Strip, Coil & Sheet
- ASTM A240
409 Stainless is used when corrosion protection is needed beyond a carbon steel capacity. Applications include: Automotive, exhaust systems, and heat exchangers.
Our wide capabilities give us a unique ability to supply all of your 409 stainless steel strip, coil, and sheet needs.
Nominal Composition
| C | Mn | P | S | Si | Cr | Ni | N | Fe | |
|---|---|---|---|---|---|---|---|---|---|
| MIN | – | – | – | – | – | 10.50 | – | – | – |
| MAX | 0.030 | 1.0 | 0.040 | 0.020 | 1.00 | 11.70 | 0.50 | 0.030 | BAL |
Physical Properties
| At 70°F | At 20°C | |
|---|---|---|
| Density | 0.280 lb./in³ | 7.75 g/cm³ |
| Modulus of Elasticity (E) | 30.2 x 10³ ksi | 208.22 x 10³MPa |
| Electrical Resistivity | 24 μ ohm.in | 60 μ ohm.cm |
Typical Room Temperature Mechanical Properties
Typical Mechanical Properties
Typical mechanical properties are based on ASTM A240
| Condition | Tensile Strength Min (UTS) | 0.2% YS Min | Elongation% in 2” Min (50.8 mm) | Hardness Rockwell |
|---|---|---|---|---|
| Annealed (Min) | 55 ksi (380 MPa) | 25 ksi (170 MPa) | 20% | 88 HRBW (Max) |
Limitation of Liability and Disclaimer of Warranty:
- The content in these data sheets is provided primarily by third-party melting mills and is provided for reference only. It is not intended for engineering or design.
- Applications may be discussed, however, Combined Metals Company, LLC, does not recommend or endorse any material for any particular end use or application.
- The data included in this data sheet are typical values and may vary.
- Combined Metals Company, LLC, makes no representations or warranties, express or implied, as to the accuracy, completeness, condition, suitability, performance, fitness for a particular purpose, or merchantability of any information contained in any data sheet.
In no event will Combined Metals Company, LLC, be liable for any damages whatsoever arising from the use of the information included in the data sheets.
Benefits of Working with Combined Metals
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, nostrud exercitation ullamco laboris nisi. Lorem amet, consectetur adipiscing elit,
HELPFUL TOOLS
Coil Calculator
Choose a calculator to find coil weights, coil OD’s, coil footage, and PIW.
PIW & Footage
Weight & Footage
Weight & PIW
The Combined Metals Family of Companies
Explore Our Companies
get in touch
Questions? Contact Our Experts Today.
The Combined Metals Company mission is to safely produce and distribute the best value and the highest quality engineered stainless steel coil and sheet, specialty alloy strip, foil, and wire products and to deliver those products to customers around the world. Give us a call at (800) 323-0758 or fill out the form.
*denotes a required field.